Casing Pipe
Sizes:
Out Diameter: 1.315″- 20″
Wall Thickness: 0.133″-0.500″
Length:R1(group1),R2(group2),R3(group3)
Materials & Grades:
Casing: J55, K55, N80, L80, P110
Application:
oil well extracting
borehole
borewell
Types:
Connections:
P (Plain end)
STC (short threads)
LTC (long threads)
BTC (buttress threads)
Premium gas-tight connectors
Non-upset ends (NUE)
External upset ends (EUE)
Premium gas-tight connectors
Others special connectors
Chemical compositions of casing pipe
| Standard | Grade | Chemical compositions（％） | |||||||||
| API SPEC 5CT | J55 | C | Si | Mn | P | S | Cr | Ni | Cu | Mo | V |
| K55 | 0.34～0.39 | 0.20～0.35 | 1.25～1.50 | ≤0.020 | ≤0.015 | ≤0.15 | ≤0.20 | ≤0.20 | / | / | |
| N80 | 0.34～0.38 | 0.20～0.35 | 1.45～1.70 | ≤0.020 | ≤0.015 | ≤0.15 | / | / | / | 0.11～0.16 | |
| L80 | 0.15～0.22 | ≤1.00 | 0.25～1.00 | ≤0.020 | ≤0.010 | 12.0～14.0 | ≤0.20 | ≤0.20 | / | / | |
| P110 | 0.26～0.395 | 0.17～0.37 | 0.40～0.70 | ≤0.020 | ≤0.010 | 0.80～1.10 | ≤0.20 | ≤0.20 | 0.15～0.25 | ≤0.08 | |
Mechanical properties of casing pipe
| Grade | Type | Total elongation
under load (%) |
Yield strength
(min)Mpa |
Yield strength
(max)Mpa |
Tensile strength
min Mpa |
Hardness
Max (HRC) |
Hardness
Max (HBW) |
| J55 | – | 0.5 | 379 | 552 | 517 | – | – |
| K55 | – | 0.5 | 379 | 552 | 655 | – | – |
| N80 | 1 | 0.5 | 552 | 758 | 689 | – | – |
| N80 | Q | 0.5 | 552 | 758 | 689 | – | – |
| L80 | 1 | 0.5 | 552 | 655 | 655 | 23 | 241 |
| L80 | 9Cr | 0.5 | 552 | 655 | 655 | 23 | 241 |
| L80 | 13Cr | 0.5 | 552 | 655 | 655 | 23 | 241 |
| C90 | – | 0.5 | 621 | 724 | 689 | 25.4 | 255 |
| C95 | – | 0.5 | 655 | 758 | 724 | – | – |
| T95 | – | 0.5 | 655 | 758 | 724 | 25.4 | 255 |
| P110 | – | 0.6 | 758 | 965 | 862 | – | – |
| Q125 | All | 0.65 | 862 | 1034 | 931 | – | – |
Casing Pipe Manufacturing Process:
Steel ingot heating → hydraulic punching → reheating → extension → periodic rolling → reheating → sizing → cooling → straightening → pipe cutting → inspection
1. An annular heating furnace is required for ingot heating;
2. Punching and reheating with hydraulic press;
3. The oil casing plant uses a two-roller guide plate extension machine for extension;
4. Re-use a disc heating furnace for periodic rolling, and use a non-entry furnace for reheating, cooling, straightening, pipe cutting, and inspection.
Reviews
There are no reviews yet.