PH6.25mm (AL cabinet) Floor LED Screen (Interactive/Normal)

Indoor PH6.25mm Floor LED Screen (Outdoor optional)

Module size:250*250mm (40*40pixels)
PH6.25mm resolution: 25,600pixels/m2
Gross weight:500*500mm (about 10.5KG/pcs)

Max power:600W/m2
Average power:180W/m2

Preview contents:

1. Half-outdoor Nationstar SMD 1921 lamp (2,500cd/m2)
2. Interactive IR sensors & Controller system (NEW)
3. Module &PC mask *Front maintenance (NEW)
4. Supporting rail frame (Height:75mm)
5. Fast connect of power plug  & signal plug 
6. Load weight:1,500-2,000KG/m2 ( a SUV car)

1,Outdoor SMD 1921 lamp (2200-2,500cd/m2)

• In practice, Indoor SMD lamp brightness :800-1,500cd/m2 ,which is too dark coverd with PC mask,and outdoor SMD lamp brightness:4,500-7,500cd/m2,which is too bright to dissipate the interior heat and make eyes uncomfortable),so we choose SMD1921 half-outdoor lamp (The max:3,000cd/m2,Average :2,200-2,500cd/m2) for our interactive floor LED screen,which is perfect solution up to now.

2,Interactive IR sensor & Controller system (NEW )

• IR Sensor Qty:8pcs/module [16pcs/module optional]

On the PCB (Printed Circuit Board),we design 128pcs IR sensors/sqmfor interaction,which has a fast speed reaction of only 0.016 second,and much more faster than Radar Device Interaction,till now it is almost fastest interactive LED floor screen in CHINA (2020,20th,March)

• Interactive controller system

Controller system for interactive floor LED screen: is different with normal controller, like LINSN,NOVOSTAR,MOONCELL…etc,Our main controller box callerd “C6 master controller” which is created by our engineer team in 2017, (DL C6 master box+ Interactive receivers+DL operating software),it has a fast refresh rate and a terrific interactive visual effect.

3,Module &PC mask&Front maintenance (NEW )

• Moduel size:250*250mm

Module PC mask:  the size is matched with SMD 1921 lamps,it not looks gorgeous.

Front maintenance: it has 2 screwing-holes in the middle to take out of the broken cabinet ,then you can replace it with  new LED module or other components.

4,Supporting rail frame  (Height:75mm)

Supporting rail frame is 500mm or 1,000mm/PCS,and in the middle there are trunking design for power & signal cables, which helps you fast installation.

5,Fast connect of  power plug & signal plug 

Power plug & Signal plug by screwing connector:help customers easily & fastly connect power and signal of each cabinets.

6,Load weight: 1,500-2,000KG/m2 (a SUV car)

Application case :

(Note: If you have any questions,please be free to contact us,thank you,)