Technical parameter
|
Power Supply Voltage |
220V/110V |
|
Power Supply Frequency |
50HZ / 60HZ |
|
Rated Power Supply |
180W |
|
LCD Display Dimension |
7.0Inches |
|
Effective Cutting Width (X axis) |
1200mm, 1500mm |
|
Effective Cutting Length (Y axis) |
2000mm, 2500mm,3000mm, 6000mm |
|
Cutting Speed |
0-2500mm per minute(Max 40000mm) |
|
Plasma Cutting Thickness |
2–20mm ( Depends on plasma power source capacity) |
|
Flame Cutting Thickness |
6–150mm |
|
Cross Beam Length |
1700mm,2000mm |
|
Longitudinal Rail Length |
2500mm,3000mm,3500mm,6500mm |
|
Longitudinal Rail Width and thickness |
300mm*100mm |
|
Gas Pressure |
Max. 0.1Mpa |
|
Oxygen Pressure |
Max. 1.0Mpa |
|
Cutting Gas |
Acetylene/Propane |
|
Plasma Power Source |
Hypertherm PowerMAX65/85/1650 or other |
|
Plasma Air |
Only pressed Air |
|
Plasma Air Pressure |
Max. 0.8Mpa |
|
Drive Mode |
Single-side |
|
Cutting Mode |
flame and plasma |
|
Ignition device |
Auto ignition device |
|
Height regulating device |
Electric adjustable high Arc voltage height and adjustable capacitance |
|
Cutting precision |
±0.5mm |
|
Control accuracy |
±0.01mm |
|
Working Temperature |
-10°C-60°C. Relative Humidity, 0-95%. |
Reviews
There are no reviews yet.